Small damper

• Makes the metal wire "elastic", no expansion and free from the risk of accidental breakage (pliers, pre-pruners, etc.).
• When fitted, the load can be regulated from 0.100 kg (ART.88) and from 0-80 kg (ART.82).
• Allows a maximum load of up to 800 kg (ART.88) and 500 kg (ART.82).
• Up to 8 rows, 200 mts. long, only needs to be placed at one end (ART.88). Rows up to 100 mts in ART.82.
• Re-establishes the load set at the start (wind, accidental loads, errors during work, etc.).
• Extends the work surface.
• No need for additional pieces to be fitted to metal posts.
• Great saving in labour when removing and fitting wires.
• Suitable for "Biek" posts, with an easy fastening system.
• In ART.82, the fastening consists of an adjustable metal loop.
• There are 3 models each for ART.82 and ART.88:
  
  
  • TYPE A: The roller regulates the tension of the wires and keeps them parallel using ART.40 (Constant distance of 125 mm).
  • TYPE B: Requires an additional wire tensioning tool which acts directly on the wire (Gripple or other).
  • TYPE C: Universal roller (ART.2/5) adjusts wire tension.